07 – Router Basic Commands P1 20,780 views

Posted by Mo7sin in CCNAX (200 - 120), Router basic commands On 24/01/2012 at 10:55 PM


Command
Purpose

Step 1

configure terminal

Example:

Router> enable

Router# configure terminal

Router(config)#

Enters global configuration mode, when using the console port.

If you are connecting to the router using a remote terminal, use the following:

telnet router name or address

Login: login id

Password: *********

Router> enable

Step 2

hostname name

Example:

Router(config)# hostname Router

Router(config)#

Specifies the name for the router.

Step 3

enable secret password

Example:

Router(config)# enable secret cr1ny5ho

Router(config)#

Specifies an encrypted password to prevent unauthorized access to the router.

Step 4

no ip domain-lookup

Example:

Router(config)# no ip domain-lookup Router(config)#

Disables the router from translating unfamiliar words (typos) into IP addresses.

For complete information on the global parameter commands, see the Cisco IOS Release 12.3 documentation set.

Read more…


%d bloggers like this: